home | site map | contact us
Winner of the 2005
QLD Panasonic
Australia Business
Award
2005 Australian
Telstra Country Wide
Incentive Award Winner
Australian Made by Trailers 2000
Trailers 2000
10 Biondi Crescent
Beerwah, QLD 4519
P.O. Box 2
Beerwah, QLD 4519
T: 1300 663 950
T:(07) 5494 6711
F:(07) 5494 6666
Brisbane
T:(07) 3822 3133
Gold Coast
T:(07) 5537 1765
Mackay
T:(07) 4952 1151
20 REASONS TO CHOOSE TRAILERS 2000
1
Zinc. It extends the life cycle of steel and reduces maintenance costs. It also helps saves
resources, is recyclable and protects human health.

2
Sealed floor on the zinc painted range stops moisture seeping into seams, giving added protection to the trailer.


3
All zinc painted trailers are undercoated in a zinc rich primer providing a sound base for our enamel finish.


4
All chassis on the zinc painted range of trailers are manufactured using high tensile SHS and RHS, offering greater strength.  The integral chassis on the galvanized range of trailers is formed using clip panel which provides a 50mm square section cross member every 300mm along the entire length of the trailer


5
The zinc painted range of trailers has square corner posts in all four corners as standard allowing for fittings such as ladder racks at any time and those corner posts correctly run from top to bottom of the trailer holding the entire section together - not just the top of the body.


6
Our trailers are joined with longer and more consistent welds much larger and stronger than tiny spot welds so regularly seen elsewhere.


7
All trailers are fitted with wear plates above the springs preventing the springs from wearing into the chassis.


8
The rear cross member is a full length hollow section giving our trailers a stronger and more reliable structure - superior to the flimsy light duty channel seen regularly in other trailers.


9
The rear gussets on the zinc painted range of trailers are fully welded into the rear cross member offering a very rigid structure - so when the tailgate is opened the sides can’t be pushed apart.


10
All wiring is channelled through hollow section or hidden away beneath the trailer giving greater protection for wiring against stones and other wear and tear.


11
Our wiring harness is just one piece. There are no pointless joins eliminating unnecessary problems


12
Break resistant lights are standard on all models and the lenses are manufactured from poly carbonate making them very difficult to break.


13
Lights on the zinc painted range of trailers are strategically located above the cross member and surrounded by a heavy duty chequer plate guard further reducing damage risk.


14
A jockey wheel clamp is standard on all trailers so a jockey wheel can be fitted at a later date if required.


15
The convenience of a quick release coupling is standard on all trailers.


16
12 months warranty.


17
Built strong.


18
Fact sheet outlining care of your trailer.


19
Award winning design.


20
Security of dealing with the most reputable recognised trailer manufacturer in Australia and winner of the Telstra & Australian Governments’ Small Business Awards 2005 Panasonic Business Award and 2005 Country Wide Incentive Award.
Trailers2000 Website Development and Website Optimisation by Trailers 2000